Cyclone Analogic Bass Bot Bedienungsanleitung PDF herunterladen (Seite 24)

Troubleshooting

Power: No Power when switched on.

 A red LED should be visible from viewing the DC in jack at the back to confirm power.

 If using battery power confirm that batteries are inserted correctly or that they are not expired.

 Confirm the supplied power adapter is being used. The power adapter supplied is specifically made for

your Bot. You may require a different type of adapter ‘head’ for your local area.

Unit is buzzing loudly.

 Unplug the power adapter and use the originally supplied 9VDC 200mA adapter with red LED on.

 Place the Bass Bot in a different area away from lamps or other high wattage devices.

Sound: No sound

 If using headphones, make sure they are connected to the headphone jack and not the output jack.

 Check that the waveform switch position is not stuck in the middle position with nothing selected.

The sound is mono

 Use the headphone jack for amplified stereo sound. The regular output jack provides a mono output.

Tuning: Sound not in tune

 Perform Automatic Tuning (see Lesson 14). Center the Tune knob to absolute center. Turn off and

back on again the power before tuning. Switch to MIDI mode then press [FUNCTION] + [C#] and

wait until the indicator LEDs turn off. Initial tuning and tuning after extended periods of no use. May

require performing the tuning procedure multiple times for best accuracy within +/- 5 cents.

 Chan

from headphone use to an amplifie

can result in perceived mistunin

from use so close to

the ears and may require automatic tuning after switching to amplifier use.

Temperature changes due to shipment or location changes of significant temperature and humidity

differences may require automatic tuning.

Cannot perform auto-tuning procedure via MIDI request.

 The Bass-Bot will not respond to MIDI commands to auto-tune and should be tuned by the user.

Pattern Editing: Cannot edit pattern or use [functions].

 Check that the Mode selector switch is set to Pattern Write.

 Check that the function to use is a Normal Mode or Pitch Mode function.

MIDI: MIDI IN not working

 I

usin

the DIN-8 MIDI Splitte

Cable

(

not required standard DIN-5 can be used fo

MIDI IN onl

check that your external device is connected to the MIDI Splitter Cable jack with the arrow pointing

inward, and that this cable is connected to your equipment’s MIDI OUT jack.

 Check correct channel number is selected fo

MIDI OUT

(

refe

to Lesson 12

)

the Bass Bot onl

supports channel (1-10 only). Channels 11-16 are not available.

MIDI OUT not working

 Be sure that you are using the DIN- 8 MIDI splitter cable. It is required for MIDI OUT functions.

 Check that

our external device is connected to the MIDI splitter cable

ack with the arrow pointin

outward, and that this cable is connected to your equipment’s MIDI IN jack.

 Check correct channel number is selected for MIDI OUT (1-10 only) Channels 11-16 are not available.

MIDI: Cannot perform MIDI update from previous OS version.

 Confirm that your device is not already up to date. OS 2.0 will display white LED fade in first on boot.

 Try another cable or MIDI/USB device.

 Check the cables’ seatin

and use a standard 5 pin MIDI cable OUT from

our compute

durin

updating to eliminate the possibility of a problem splitter cable which is not necessary for an update.

1 2 ... 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Cyclone Analogic Bass Bot Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Synthesizer Cyclone Analogic Bass Bot